吾給力的部落格

From open source data.

In common mechanical knowledge, some position could be leveraged from V1 or similar position of other motorcycle

And only list some position torque value which will be used/needed by myself.

------------------------------------------------------------------------------------------------------------------------

R15 V3 UpSide-Down 扭力值 - Nm ：From Owner's Manual (Printed in Malaysia, 1st edtion)
Spark Plug - 火星塞 13 Nm (手轉緊再1/4~1/2圈); 印尼(Indonesia. 1st edition) 12.5 Nm *(close in to 13)
Engine Oil drain Bolt - 引擎洩油螺絲 32Nm ; 交換量0.85L/0.95L(w/ oil filter)
Oil Filter Cover Bolt - 機油濾芯蓋螺絲 10Nm
Rear Wheel Axle Nut - 後輪軸芯 59 Nm (Locknut 16Nm)
Front Wheel Axle - 前輪軸芯 40 Nm
Front Brake Caliper Bolt - 前輪卡鉗螺絲 35 Nm
*Leverage from V1
Steering Stem Bolt - 轉向桿螺絲 35 Nm (M10)
Engine Mounting Nut(Front Side,Rear Upper/Lower Side) - 引擎固定螺絲 49 Nm (M10)

----------------------------------------------------------------------------------------------------

R15 V1 扭力值 - Nm ：From Service Manual
GENERAL TIGHTENING TORQUE - 一般緊度扭力值
*Nut measure from the Tool-Size. 
*Bolt measure from the outside-thread diameter.

A-Nut / B-Bolt - 螺母 / 螺絲(螺栓) - 扭力值
10mm /  6mm -  6 Nm
12mm /  8mm - 15 Nm
14mm / 10mm - 30 Nm
17mm / 12mm - 55 Nm
19mm / 14mm - 85 Nm
22mm / 16mm - 130 Nm

Engine List
Spark Plug - 火星塞 13 Nm (手轉緊再1/4~1/2圈)
Engine Oil drain plug - 引擎洩油螺絲 32 Nm
Oil Filter Element Cover Bolt - 機油濾芯蓋螺絲 10 Nm

Chassis List
Engine Mounting Nut(Front Side,Rear Upper/Lower Side) - 引擎固定螺絲 49 Nm (M10)
Rear Wheel Axle Nut - 後輪軸芯 110 Nm (M14)(Locknut 16 Nm) *Strange Value
Rear Shock Absorber Assembly Upper/Lower Nut - 後避震上下鎖點 44 Nm (M10)
Front Wheel Axle - 前輪軸芯 65 Nm (M12)
Front Brake Caliper Bolt - 前輪卡鉗螺絲 35 Nm (M10)
Front Brake Disc Bolt - 前碟盤螺絲 23 Nm (M8)
Steering Stem Bolt - 轉向桿螺絲 35 Nm (M10)

----------------------------------------------------------------------------------------------------

R15 V? 扭力值 - Nm ：From Service Manual
Front Wheel Axle - 前輪軸芯 38 Nm