吾給力的部落格

LSI Storage Authority (LSA) shows blank screen under Linux OS (CentOS, RHEL, Ubuntu)

印象中LSA剛出的時候，這問題就存在了

，時間點大概是2019年5月的時候，那時候使用的版本是007.009.001.000_lsa_linux-x64.zip

後來我發現是LSA軟體套件內自帶的openslp所造成的狀況。

Workaround: 去OpenSLP官網下載openslp-2.0.0.tar.gz 。

Install OpenSLP
# tar zxvf openslp-2.0.0.tar.gz
# cd openslp-2.0.0/
#  ./configure
# make
# make install
# make install all

然後再去LSA，安裝好之後，打開網頁，輸入http://{ip}:2463/，就能連到了

這個問題，我曾經2020/06跟台灣的代理商(Morrihan)反應過，至於他們有沒有確實回報原廠，我就不清楚

至少這個當下2023/01/11，下載最新的008.003.012.000還是有這個問題。(w/ CentOS 8.4)

手動安裝openslp之後，建議手動檢查這兩個檔案路徑有沒有存在檔案
/usr/local/sbin/slpd
/usr/sbin/slpd
如果僅其一存在，我的作法是# ln -s /usr/local/sbin/slpd /usr/sbin/slpd，設軟連結過去。

備註：雖然用套件管理員yum/dnf/apt能安裝openslp，但可能不能用 (e.g.: CentOS 8.4)
如果LSA安裝過程仍出現未安裝openSLP，代表/usr/local/sbin/slpd、/usr/sbin/slpd這兩個路徑下都沒東西或缺一

Following OpenSLP Web (http://www.openslp.org/doc/html/UsersGuide/FileLocations.html)

What did you do to my machine?
OpenSLP User's Guide » Installation » What did you do to my machine?

Most system administrators, at least the good ones, want to know exactly what is being done by installation scripts especially if the script was executed with root privileges.  The following is a list of file copies and modifications that are made by the installation script:

Daemon, Libraries and Config files

<dist dir>/slpd/slpd         ==>  /usr/sbin/slpd
<dist dir>/libslp/libslp.so  ==>  /usr/lib/libslp.so
<dist dir>/libslp/libslp.a   ==>  /usr/lib/libslp.a
<dist dir>/etc/slp.conf      ==>  /etc/slp.conf
<dist dir>/etc/slp.reg       ==>  /etc/slp.reg